Register file port requirements of transport triggered architectures

Exploitation of large amounts of instruction level parallelism requires a large amount of connectivity between the shared register file and the function units; this connectivity is expensive and increases the cycle time. This paper shows that the new class of transport triggered architectures requires less ports on the shared register file than traditional operation triggered architectures. This is achieved by programming data-transports instead of operations. Experiments with our extended basic block scheduler have shown that the reduction of the required number of register file ports is substantial. The average requirement for scalar applications is 0.50 read and 0.35 write ports per operation instead of 2 read and 1 write ports. Due to this reduction it is possible to execute 2 operations per cycle with a two-ported register file and 3.6 operations per cycle with a six-ported register file.

• Type: Conference
• Year: 1994
• Where: MICRO
• Authors: Jan Hoogerbrugge, Henk Corporaal
• Keywords: Hardware, MICRO 1994, Register File, Register File Ports, Write Ports